Bright Bar - Exporter & Manufacturer, Delhi, India

To inquire, Select Product/s & Click on

Product Code : 8976

[Select]

Product Specification

In Steel Industry we are known amongst the Best Bright Bar producers in INDIA. The production range includes Rounds, Flats, Ingots, Strips up to 15000 tons per annum. Specifications for the Supply is detailed as under.
Size Range
16mm, 150mm up to 6 inches.
Diameter Tolerances
H9, H10, H11, F9, F11, F12, K10, K11, K12, as per DIN 671 DIN 10278.
End Finish
Faced, Sawed on e sided or both sided
Chamfered ends 30,45,60 Degrees one sided or both sided as per the requirement.
Delivery Conditions On request available

Very Fin e diameter Tolerances E7, G7, H7, F7, H8, F8, E8, G8.
Surface finish up to Ra value 0.2 µm 12 RMS.
240, 320 grit polished.
Straightness up to 0.5 mm per meter TIR.
Centered Bar Ends 90 Degrees.
Length Tloerances of -0, +10mm -0, +0.5 inch.
100% material identity tested thru Niton handheld spectometer.

Packing of Bars
Before the highly finished bars ar carefully packed, each length of the bar goes to through the following processes

Both ends are color coded, as per the customer’s requirements.

Ends of bars above 30mm are hard stamped with the heat number and the grade of the material.

Each bar is thoroughly cleaned to remove the oil or grease from the surface.

A range of plastic rings depending on the length of bars are inserted in every bar to avoid rod to rod contact is available as per requirement.

To preserve the defect free surface of the bars during transportation and handling these bars are then coupled with PP straps, and wrapped in LLDPE plastic sheets and then again wrapped with the HDPE Sheets, for complete security of the shining bars.

Other Products in 'Bright Bars' category

Hot Rolled Black Bar	Hot Rolled Rounds / Bright Bars

<< Back